• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 117 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DP83867ERGZ-R-EVM: Typo?

Kei Kuwahara
Expert 6100 points
Part Number: DP83867ERGZ-R-EVM

Hello team,

On the user guide, it says GPIO_0 is connected to RJ45 Left (Green).

But on the schematics, GPIO_0 is not connected to LED, and GPIO is not meant for driving LED.

Is GPIO_0 statement should be LED_0?
Could you please check if is this a typo?

Best Regards,
Kei Kuwahara

  • 0
    TI__Mastermind 34465 points

    Hi Kuwahara-san,

    I think you would need to talk with the AM62 team for more relevant help. However, some potential possibilities for this is that the AM62 SoC is programming the PHY with some initializations to alter the GPIO functionality. You can see that LED3 is also a choice in the bitfield.

    Sincerely,

    Gerome