DP83867ERGZ-R-EVM: Typo?

Kei Kuwahara

Expert 8510 points

Part Number: DP83867ERGZ-R-EVM

Hello team,

On the user guide, it says GPIO_0 is connected to RJ45 Left (Green).

But on the schematics, GPIO_0 is not connected to LED, and GPIO is not meant for driving LED.

Is GPIO_0 statement should be LED_0?
Could you please check if is this a typo?

Best Regards,
Kei Kuwahara

over 2 years ago

0 Gerome Cacho over 2 years ago

TI__Mastermind 41755 points

Hi Kuwahara-san,

I think you would need to talk with the AM62 team for more relevant help. However, some potential possibilities for this is that the AM62 SoC is programming the PHY with some initializations to alter the GPIO functionality. You can see that LED3 is also a choice in the bitfield.

Sincerely,

Gerome

Interface

Interface forum

DP83867ERGZ-R-EVM: Typo?