• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 73 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS280DF810: Replace DS250DF810

Roy Hsu
Intellectual 2810 points
Part Number: DS280DF810
Other Parts Discussed in Thread: DS250DF810,

Hi Team,

I check below link but I would like to double check that if DS280DF810 can P2P replace DS250DF810 at hardware part, and at software part no need to change software code at <= 25G data rate condition since these two device share same register map correct?

https://e2e.ti.com/support/interface-group/interface/f/interface-forum/766200/ds280df810-the-device-id-of-ds280df810-is-the-same-as-ds250df810?tisearch=e2e-sitesearch&keymatch=DS250DF810%25252520AND%25252520DS280DF810#

Thanks.

Best Regards,

Roy

  • +1
    TI__Mastermind 20282 points

    Hi Roy,

    It is correct that DS280DF810 can P2P replace DS250DF810.  There are no configuration changes required, but please note that the devices have different device IDs.  If customer is checking device ID, they may need to modify their software.

    Thanks,

    Drew