Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 109 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN65LVDT33: Maximum pulse and output skew

Kimberlee Shimizu
Prodigy 30 points
Part Number: SN65LVDT33

Hello,

I'm performing a worst-case timing analysis.  Could you please provide maximum tsk(p) (Pulse skew) and maximum tsk(o) (Output skew)?  I see that only nominal values are presented in the current datasheet. 

Thank you.   

  • 0
    TI__Genius 14681 points

    Hi Kimberlee,

    Looking at the device datasheet, you can see that the pulse skew was determined based on the propagation delay time, low-to-high-level output and propagation delay time, high-to-low-level output. These parameters do have min / max values, which would have been determined based on statistical data. This is why these values are not then again used to determine min / max values for pulse skew, and only a typical is quoted. 

    This device is very old and the exact characterization data is not readily available, if it was taken.

    Regards, Amy