DS90UB9702-Q1: FPD-LINK3 and FPD-LINK4

Huan YANG

Part Number: DS90UB9702-Q1

Hello TI experts,

Could FPD-LINK3 and FPD-LINK4 run simultaneously on DS90UB9702-Q1?

In our application, we need connect one 8MP remote camera and three 3MP remote cameras.

The 8MP remote camera follows FPD-LINK4 while the three 3MP remote cameras follow FPD-LINK3.

Besides, how many channels of MIPI are recommended for DS90UB9702 when connecting to TDA4?

Thanks a lot.

0 Hamzeh Jaradat 9 months ago

Hello Huan,

yes, you can mix and match any camera at any speed.

Huan YANG said:
Besides, how many channels of MIPI are recommended for DS90UB9702 when connecting to TDA4?

This depends on your data rate and the used speed per lane. But you may use 1, 2, 3 or 4 lanes.

0 Huan YANG 9 months ago in reply to Hamzeh Jaradat

Hello Hamzeh Jaradat,

Apologize, I mean how many MIPI ports are recommended.

From speed view, 1 MIPI CSI port with 4 lanes is enough.

0 Hamzeh Jaradat 9 months ago in reply to Huan YANG

Hello Huan,

Can you please provide the details of both cameras? i.e. data type, Hres, Vres, frame rate.

Interface forum