TS5USBC400: BGA package layout

Yishan Chen

Intellectual 1080 points

Part Number: TS5USBC400
Other Parts Discussed in Thread: TS3USB221, TMUXHS221

Hi,

Customer want a USB MUX and I find TS5USBC400.

Is it possible to layout without 'via in pad'?

And do we have other devices that can achieve same function with different package?

Thank you

Yishan Chen

9 months ago

0 Ryan Kitto 9 months ago

TI__Mastermind 24105 points

Hi Yishan,

For this device, you could do a dogbone structure trace for these pins, which would help avoid doing a via in pin.

What USB Speed are you looking for USB2, USB3, USB Type-C? For other USB2 muxes, we also have the TS3USB221/A/E, or the TMUXHS221.

As far as I know, this package is the only package we have for our USB2.0 Type-C Muxes.

Please let me know if you have any other questions.

Thanks,

Ryan

0 Yishan Chen 9 months ago in reply to Ryan Kitto

TI__Intellectual 1080 points

Hi Ryan,

Thank you.

Based on information I got right now, the speed is 480Mhz.

Could TS5USBC400 support USB2.0 and USB-type-C?

Ryan Kitto said:
TS3USB221/A/E,

Customer want two select pin, but these devices only have 1 select pin. Do we have 2 select pin devices with other type package and also support 1:2 SPDT?

Thank you again.

Yishan Chen

0 Nicholaus_Malone 9 months ago in reply to Yishan Chen

TI__Mastermind 26090 points

Hi Yishan,

Ryan is out of office today. I'm checking for device recommendations now.

Regards,

Nicholaus

0 Nicholaus_Malone 9 months ago in reply to Nicholaus_Malone

TI__Mastermind 26090 points

Hi Yishan,

The TS3USB211 technically does have two select pins. OE# and S. Would this work for the customer?

If they'd like a new package. Here is a list of potential passive muxes.

2:1 SPDT USB redrivers & multiplexers product selection | TI.com

Regards,

Nicholaus

Interface

Interface forum

TS5USBC400: BGA package layout