• State Resolved
  • Locked Locked
  • Replies 4 replies
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 193 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90UB927QEVM: DS90UB927QEVM win10 NSC USB NANO

?? ??
Prodigy 20 points
Part Number: DS90UB927QEVM
Other Parts Discussed in Thread: ALP, USB2ANY

"Please tell me, I bought the DS90UB927QEVM.

I downloaded and installed the 'DS90Ux927QEVM ALP Software' from this page. Analog LaunchPAD v1.29.0010 

www.ti.com/.../DS90UB927QEVM

During the installation, the USB driver installation did not appear. When I connect the evaluation kit to the PC and launch the ALP software, it enters demo mode and does not connect.

When I run 'ALPUSBDriver.exe' from the Drivers folder in the ProgramFiles, it displays 'Opal Kelly FrontPanel Driver has been installed on your computer.'

I have not been able to resolve this issue even after looking at other people's inquiries. What should I do? I want to resolve the USB driver issue without using USB2ANY."

Best　Regards,

  • 0
    TI__Genius 9840 points

    Hi,

    Can you reinstall ALP. The verision of ALP you are using is v1.29.0010. The current version of ALP is Analog LaunchPAD v1.57.0010.

    Install the framework and ALP profile update: https://www.ti.com/tool/ALP

    Best Regards,

    Gil Abarca

  • 0 in reply to Gil Abarca Ramos
    Prodigy 20 points

    Thank you for your response.
    I have installed the latest version from the URL you provided.

    However, the issue with the USB driver has not been resolved.
    Is there a location where I can find the latest version of the executable file to install the USB driver?

    From the Device Manager, under NSC USB NANO → ... → Have Disk..., I cannot find the "cyusb3" file.
    I apologize for bothering you while you are busy, but could you please advise?

    Best Regards,

  • +1 in reply to ?? ??
    TI__Genius 9840 points

    Hi,

    Did you install the Cypress CyUSB driver?

    This would be a great resource for you:

    1. Open Analog LaunchPad
    2. Go to help
    3. Click on ALP Help
    4. It will open a new window and click on "Driver Installation"
    5. Follow the instructions in "Installing NSC USB NANO driver"

    Best Regards,

    Gil Abarca

  • +1 in reply to Gil Abarca Ramos
    Prodigy 20 points

    Thank you for your response.

    I was able to connect successfully.

    I will describe the points that did not work well following the ALP HELP procedure.
    1. Even when I searched the URL of the link on the web, I ended up on a page with nothing related to infinion or an error page. I registered on the infinion site, searched for "cypress cyusb driver," and downloaded "cyusb3 usb suite source software."
    2. Since the .inf file was not included in the file from 1, I downloaded the "Driver.zip" file from the "EZ-USB FX1, FX2LP, FX3 driver" community on infinion.
    After that, I was able to install it following the HELP instructions.
    * 1 might be unnecessary.

    I appreciate your help. Thank you.

    Regards,