Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 117 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TUSB8041A: TUSB8041A application

lee taeyeon
Prodigy 10 points
Part Number: TUSB8041A

hello. everyone,

I am trying to connect two infineon's CX3 (mipi to usb3.0 Controller) with TUSB8041A.

The maximum output of CX3 is 2.4Gbps. The maximum input my PC can receive is 2.4Gbps? Or is it 4.8Gbps?

thank you,

  • 0
    TI__Guru** 123980 points

    USB 3.0 data rate is 5Gbps , If CX3 is mipi to USB 3.0 bridge, then CX3 should convert mipi 2.4Gbps to USB3 5Gbps.

    Any PC which can support USB3.0, it should support 5Gbps.

    TUSB8041A can support 5Gbps as well

    Regards

    Brian