TS3USB3000: Use for MUXing standard signals

David Guest1

Intellectual 410 points

Part Number: TS3USB3000

Can this be used to mux normal logic signals - or is the operation very specific to USB/MHL

Looking to MUX a UART port (TXD/RXD) on a micro

over 2 years ago

0 Ryan Kitto over 2 years ago

TI__Guru 55155 points

Hi David,

What is the needed bandwidth and voltage of these signals? I believe this mux should be able to support UART signal muxing, but I just want to confirm.

Thanks,

Ryan

0 David Guest1 over 2 years ago

Intellectual 410 points

Thanks for prompt reply.

It's 1.8V and 3V signals at 115200 baud

0 Ryan Kitto over 2 years ago in reply to David Guest1

TI__Guru 55155 points

Hi David,

Okay, got it. I think this should be okay, I don't see any issues.

Please let me know if you have any other questions.

Thanks,

Ryan

0 David Guest1 over 2 years ago in reply to Ryan Kitto

Intellectual 410 points

That's great, thanks.

Interface

Interface forum

TS3USB3000: Use for MUXing standard signals