• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 200 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DP83825I: Corner pads, visual inspection

HS FAE Germany
Mastermind 32250 points
Part Number: DP83825I
Other Parts Discussed in Thread: DP83826I

Hi,
customer has to do a visual inspections after soldering in production. He claimed that this is not possible with the corner pins/pads. So in this case the recommendation is to move to DP83826I?

Regards, Holger

  • 0
    TI__Mastermind 39855 points

    Hi Holger,

    This is a unique concern from customer, but if their methodology makes it difficult to inspect corner pin/pads, DP83822 or DP83826 would be equivalent PHYs (10/100Mbps, MII/RMII). If there is other unique aspects of their design which they are unsure carry over between PHYs, please let us know.

    Sincerely,

    Gerome