SN65DP159: How to get firmware for SN65DP159 I2C register to set via TUSB3410 bridge?

Ali Kelem

Prodigy 75 points

Part Number: SN65DP159
Other Parts Discussed in Thread: TUSB3410

Hi,

How can I access I2C register for SN65DP159 via TUSB3410 bridge?

I think there is a firmware to burn in a EEPROM connected TUSB3410, right?

Could you please send me firmware for DP159?

Thanks.

Ali

over 1 year ago

0 Ali Kelem over 1 year ago

Prodigy 75 points

Can I use EYESCAN tool to set/read DP159 registers without any firmware in EEPROM connected to TUSB3410?

+1 Vishesh Pithadiya over 1 year ago in reply to Ali Kelem

TI__Mastermind 38445 points

Hey Ali,

The TUSB3410 is a USB-UART bridge, but there is a firmware that can convert it to an USB to I2C bridge. Please accept my friend request so I can send you the files via a private message.

0 Ali Kelem over 1 year ago in reply to Vishesh Pithadiya

Prodigy 75 points

Hi Vishesh,

I've accepted friend request.

Another question;

I think TUSB3410 is an obsolete device, right? Is there any replaceable equivalent device works on DP159?

Thanks.

Ali

+1 Vishesh Pithadiya over 1 year ago in reply to Ali Kelem

TI__Mastermind 38445 points

If you want to have a USB to I2C controller I recommend the total phase Aardvark.

+1 Vishesh Pithadiya over 1 year ago in reply to Vishesh Pithadiya

TI__Mastermind 38445 points

I sent the file on the private message.

0 Ali Kelem over 1 year ago in reply to Vishesh Pithadiya

Prodigy 75 points

Many thanks Vishesh.

Interface

Interface forum

SN65DP159: How to get firmware for SN65DP159 I2C register to set via TUSB3410 bridge?