Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 32 subscribers
  • Views 108 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMH0376: unused pins

Babu Mucharla
Prodigy 120 points
Part Number: LMH0376
Other Parts Discussed in Thread: LMH0318

In my project for sdi related we uses LMH0376 IC. But iam not using sdi3 input signal and one output signal SDO1.

those are i left float or NC.any problem with that,what will do unused inputs and one output

  • 0
    TI__Guru* 93670 points

    Hi Babu,

    Please use AC coupling Caps - 1uF - and 49.9-ohm Resistors to GND to terminate un-used inputs and outputs.

    There are newer devices for retiming applications such as LMH0318. You can consider this device as well.

    Regards, Nasser