Other Parts Discussed in Thread: TCA6507
Two TCA6507 are used on the I2C bus with same address but the chip enable is handled seperately. Is there any specific design constraint on this ?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Other Parts Discussed in Thread: TCA6507
Two TCA6507 are used on the I2C bus with same address but the chip enable is handled seperately. Is there any specific design constraint on this ?
As long as only one chip is enabled at a time there is no specific design constraint.