• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 34 subscribers
  • Views 361 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS280BR810: Can I use two or more this IC in one link?

Faure Katie
Prodigy 10 points

Part Number: DS280BR810
Other Parts Discussed in Thread: DS280DF810

Tool/software:

here i have a link like below:

FPGA --> connector --> cable --> connector --> DS280BR810 --> connector --> DS280BR810 --> QSFP module

can this work? in one link with two or more DS280BR810.

  • 0
    TI__Mastermind 40183 points

    Hi Faure,

    It is generally not recommended to cascade redrivers because redrivers only compensate for ISI due to channel insertion loss.  They do not remove jitter as effectively as retimers.

    Is this for 25GbE application?  Have you considered DS280DF810?

    Also, can you share estimated insertion losses within your system?

    Thanks,

    Drew

  • 0 in reply to Drew Miller1
    Prodigy 10 points

    Hi Drew:

    yes, this is a 25GbE application, you mean i can use a DS280DF810 replace DS280BR810?

    just like below?

    FPGA --> connector --> cable --> connector --> DS280BR810 --> connector --> DS280DF810 --> QSFP module

    The insertion loss of my system is around -40dB or higher, I think.

  • 0 in reply to Faure Katie
    TI__Mastermind 30730 points

    Hi Faure,

    Yes I believe the above configuration will be better suited for your application. If you are interested, I can share IBIS-AMI models for DS280DF810 and DS280BR810. These can be useful to perform simulations and build confidence in the design.

    Best,

    Lucas