Part Number: TCAN1044V-Q1
Tool/software:
Dear Team,
Both "Layout" on page 27 and "Device and Documentation Support" on page 28 are marked as #11. Is this an error? If so, is there a plan to correct it?
Best Regards,
Tomoyuki Shimamura
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TCAN1044V-Q1
Tool/software:
Dear Team,
Both "Layout" on page 27 and "Device and Documentation Support" on page 28 are marked as #11. Is this an error? If so, is there a plan to correct it?
Best Regards,
Tomoyuki Shimamura
Tomoyuki-san,
Thanks for pointing this out! I've put in a ticket to have it corrected upon the next data sheet revision. These section numbers are automatically handled when documents are generated, so we'll take a look and get this rectified on the next update.
In the future, if you use the "Submit Documentation Feedback" link on the data sheet, it will automatically create this ticket for us on our end. In this case I've gone ahead and submitted it, so it is covered.
Best,
Danny
Danny-san,
Thank you for your response. I appreciate your prompt attention. I checked the TCAN1044V-Q1 datasheet, but I couldn’t find the “Submit Documentation Feedback” link. Could you please let me know on which page it is located for future reference? Thank you.
Best Regards,
Tomoyuki
Tomoyuki-san,
It's on every page except page 1, either in the bottom left or bottom right hand corner.
Regards,
Eric Hackett