DS25BR440: The distance of the Redriver

Zhang Liang

Part Number: DS25BR440
Other Parts Discussed in Thread: DS15EA101, DS15BA101, LMH0384

Tool/software:

Hi,

We need to use the LVDS for our design, and now, customer request the LVDS Cable is 10-15m, we test the DS25BR440 that it is only support 8m Cable distance of the LVDS signal,

So please advise if there are any redriver or Serializer & decoder will support 10-15m Cable distance? thanks.

9 days ago

0 Clemens Ladisch 9 days ago

Guru 253970 points

What frequency?

0 Zhang Liang 9 days ago in reply to Clemens Ladisch

Expert 2235 points

Hi Clemens,

The frequency is 60MHz, thnaks.

0 Nasser Mohammadi 8 days ago in reply to Zhang Liang

TI__Guru* 90900 points

Greetings,

For longer distances typically DS15BA101 and DS15EA101 devices are used.

At 60MHz typically there is not much loss so i am not what type of cable insertion loss is used in this application. Please refer to DS15EA/BA101 for cable model.

Regards, Nasser

0 Zhang Liang 18 hours ago in reply to Nasser Mohammadi

Expert 2235 points

Hi, Nasser,

Thanks for your kindly promotion.

Can you also inform us the below issue:

1. The max. distance of the LVDS signal transfer when we use the DS15BA101 and DS15EA101?

2. The voltage of the VPP is 750mV, but our LVDS voltage is 350mV, and we need to connect the screen to DS15EA101, is there any problem for this design?

0 Nasser Mohammadi 17 hours ago in reply to Zhang Liang

TI__Guru* 90900 points

Hi Liang,

1). This device has high gain about 30 to 40dB gain. Based on your cable loss you can calculate maximum distance.

2). If you must have LVDS compatible voltage swing then you can consider LMH0384 instead of DS15EA101. Here is a link to the LMH0384 data sheet:

https://www.ti.com/lit/ds/symlink/lmh0384.pdf?ts=1719336354095&ref_url=https%253A%252F%252Fwww.ti.com%252Fsitesearch%252Fen-us%252Fdocs%252Funiversalsearch.tsp%253FlangPref%253Den-US

Regards, Nasser

Interface

Interface forum

DS25BR440: The distance of the Redriver