• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 320 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

DS90UB941AS-Q1: What needs to be modified when the output of ds90ub941 is changed from dout0 to dout1

DS90UB941AS-Q1: register modify when switch DOUT0+ and DOUT1+ between two display

Darren Wen
Prodigy 450 points
Part Number: DS90UB941AS-Q1


Tool/software:

Hi team, 

Customer would like to check that

1) whether switch DOUT0+(DOUT0-) and DOUT1+(DOUT1-) between two display is feasible for DS90UB941AS-Q1?

2) If 1) is feasible, please help to add comments about the register change to match the change of DOUT, and is there anything else need to pay attention?

BR.

Darren