• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 93 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS320PR1601: REDRIVER

SHEKHA SHOUKATH
Intellectual 310 points
Part Number: DS320PR1601

Tool/software:

Hi

In the user guide of DS320PR1601EVM,  table 2-4 (Page 5) depicts only downstream A channel mapping.

How B channel mapping is done in downstream side?

Thanks and Regards,

Shekha Shoukath

  • 0
    TI__Genius 15571 points

    Hi Shekha,

    The channels are mapped to the same lanes on the downstream and upstream sides.

    For example, A channel 0 RX (from CPU) is connected to A channel 0 TX, and both are connected to physical lane 0.

    There are no Upstream A-side channel RX and there are no downstream B-side channel RX.

    Best,
    David