Other Parts Discussed in Thread: DP83869, DP83869HM
Tool/software:
Hello tech team,
if two DP83869 chips being linked by fiber to extender RGMII at 1Gbps, will it work by hardware setting without MCU in control?
Thanks
Xiaolin
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
Hello tech team,
if two DP83869 chips being linked by fiber to extender RGMII at 1Gbps, will it work by hardware setting without MCU in control?
Thanks
Xiaolin
Hi Xiaolin,
Could you provide a block diagram of your desired setup, I am unsure of what you mean by "linked by fiber to extended RGMII".
The DP83869HM can be configured into different operational modes (OPMODEs) without the need of MCU control, as described in Section 7.5.1.2 of the data sheet. If RGMII to 1000Base-X is the desired use case, please use OPMODE: 001.
Regards,
Alvaro