Tool/software:
Hi,TI Engineer
Can I use a common mode inductor to replace the two inductors(L1,L2) (L3,L4) here,To reduce PCB area。
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Li,
No you can't use a common mode inductor - these inductors are operated differentially so common mode inductances aren't going to work.
However you can use coupled inductors as long as they operate in a differential mode.
Best,
Parker Dodson