• State Resolved
  • Locked Locked
  • Replies 6 replies
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 195 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90LV001: Is it possible to use MLVDS to LVDS Buffer

Shinichi Inoue
Guru 20566 points
Part Number: DS90LV001
Other Parts Discussed in Thread: SN65MLVD2, DS90LV011A, SN65MLVD202A

Tool/software:

Dear Specialists,

My customer is looking for a buffer for MLVDS to LVDS and LVDS to MLVDS.

Is DS90LV001 possible to use for?

If not, could you please let us know the other suitable device?

I appreciate your great help in advance.

Best regards,

Shinichi

  • 0
    Guru 281530 points

    The electrical characteristics are somewhat different, but in many cases, LVDS and M-LVDS transceivers can be made compatible with each other without a separate buffer. What is the actual problem you're trying to solve?

  • 0 in reply to Clemens Ladisch
    Guru 20566 points

    Hi Clemens,

    Thank you for your reply.

    The information I have is listed below.

    Could you please advise？

    ｰｰｰ

    The customer would like to connect between MLVDS bus and LVDS.

    If possible, they would like to extend the distance with a buffer

    Power Supply: 3.3V

    Data Rate: 100Mbps

    I couldn't find a device that clearly stated LVDS output with MLVDS input (or MLVDS output with LVDS input).

    ｰｰｰ

    I appreciate your great help and cooperation.

    Best regards,

    Shinichi

  • +1 in reply to Shinichi Inoue
    Guru 281530 points

    M-LVDS inputs have a wider common-mode range, and M-LVDS outputs have a higher drive strength. So you can use them with LVDS transceivers.

    You could build an M-LVDS buffer with a full-duplex transceiver like the SN65MLVD202A/205A and connecting R to D. Alternatively, use a plain M-LVDS receiver like the SN65MLVD2/3 and connect it to a plain LVDS driver like the DS90LV011A/17A.

  • 0
    TI__Genius 14981 points

    Hello,

    I have been out of office and I will get back to you this week.

    Thank you, Amy

  • 0 in reply to Amy
    Guru 20566 points

    Hi Clemens,

    Thank you for your reply.

    I share your suggestion with the customer.

    I appreciate your great help and cooperation.

    Best regards,

    Shinichi 

  • 0 in reply to Shinichi Inoue
    TI__Genius 14981 points

    Glad this solved the problem. Please reach out with any questions.

    -Amy