Tool/software:
Hi Melissa,
My customer have three questions about RGMII delay:
1. When setting the delay in RGMII TX Spec, the measurement point is thought to be Told(shift) / Tsetup(shift).
However, only Tsetup(align) / Told(align) was found in the datasheet. Could you tell me Told(shift)/Tsetup(shift) value?
2. When setting delay in RGMII RX Spec, the measurement point is thought to be Tskew (shift).
Only Tskew(align) / Tsetup(shift) was found in the datasheet. Please let me know about Tskew (shift) value.
3. Is Tsetup(shift) in the datasheet different from Tsetup(shift) in TX?
Regards,
Youhei MIYAOKA
