DS26LS31MQML: Output amplitude and common mode

Tom Domanski24

Expert 3325 points

Part Number: DS26LS31MQML
Other Parts Discussed in Thread: AM26C31M

Tool/software:

Hi There,

I cannot find a specification for the differential output voltage magnitude or common-mode output voltage.

Am I missing this information or is it supposed to be calculated?

Thank you for your insight in advance.

As ever,

Tom

over 1 year ago

+1 Clemens Ladisch over 1 year ago

Guru 317360 points

Yes; you can compute it from the V_OH and V_OL specifications, which imply at 100 Ω load. Typical values are shown in figure 10.

(The AM26C31M specifies the values you want, but it's a CMOS device.)

0 Amy over 1 year ago

TI__Genius 15321 points

Hi Tom,

I believe that the parameters you are looking for are on page 3 of the datasheet, listed as VOH / VOL. For common-mode, the top of the table states "The following conditions apply, unless otherwise specified. +V = 5V, VCM = 0V".

Best regards, Amy

Interface

Interface forum

DS26LS31MQML: Output amplitude and common mode