• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 270 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TUSB522P: USB 3.1 drive detection.

Chen Alex1
Genius 4215 points

Part Number: TUSB522P

Tool/software:

In current status, we have issue with USB 3.1 drive detection.

So we want to check the performance if we use the USB 3.1 re-driver, TUSB522PRGET.

 

Is TI teams have any resource to support USB 3.1 Gen 1 SI simulation(Eye diagram for TX & RX) with using TUSB522PRGET?

Please refer the block diagram as below.