Tool/software:
Hi,
From datasheet, I understand that this part is good for SPR (24V dc tolerant). What is the recommended part for an EPR design. For now our design can support upto 28V@5A.
Thanks,
Nadeem
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software:
Hi,
From datasheet, I understand that this part is good for SPR (24V dc tolerant). What is the recommended part for an EPR design. For now our design can support upto 28V@5A.
Thanks,
Nadeem
Hi Nadeem,
Apologies for delay in response on this one. We have a new protection IC that will be releasing at the end of this month that supports EPR voltages all the way up to 48V. It will be in the same package and similar pinout as the TPD6S300A. Please keep a look out for this upcoming release on TI.com!
Thanks,
Matt Schafer