• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 33 subscribers
  • Views 275 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DS90LV011AQ-Q1: An increase in power off leakage current an issue?

David Stout
Prodigy 10 points
Part Number: DS90LV011AQ-Q1

Tool/software:

Any issues with an increase in power off leakage current to about 120uA?  Specifically (Out - with VDD = 0V and Vo = 0V)

The receiver on the other end should not have any issues however I wanted the opinion of the manufacturer.  Thanks in advance!

  • 0
    TI__Genius 15321 points

    Hi David,

    The datasheet shows that the power of leakage current maximum to be +/- 10 uA. Would be able to provide more details on your question?

    Thank you, 

    Amy

  • 0 in reply to Amy
    Prodigy 10 points

    The leakage current was measured after "environmental screening" was conducted on the component.  The current on the - out pin when powered off and Vo = 0V was measured as +120uA which indicates the Out- pin has 120uA of current flowing into it.  I can't see this as being an issue regardless of the measured value exceeding datasheet specifications. 

  • 0 in reply to David Stout
    TI__Genius 15321 points

    Hi David, 

    The datasheet mentions a short circuit absolute maximum of 24 mA. It is not recommended to operate the device for extended periods of time above the recommended conditions. 
    Thanks, Amy