Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 55 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

DS250DF230: Do you have reference eye masks for the EOM function representing the minmun eye opening to give a certain BER...

DS250DF230: How much is the input jitter tolerance measured around 6.25Gbps expected?

?? ??
Prodigy 50 points
Part Number: DS250DF230
Other Parts Discussed in Thread: DS110DF111

Tool/software:

We would like to confirm the input jitter tolerance of DS250DF230 at 6.25Gbps and

the one of DS110DF111 at 2.125Gbps.

If you have relavant data, please let me know.

  • +1
    TI__Mastermind 23707 points

    Hi,

    Unfortunately we do not have jitter tolerance data for these test cases.

    For DS250DF230, we have some data at 9.8304 Gbps. In this case, we had about 0.6-0.7 UI of jitter tolerance. I would expect jitter tolerance at 6.25 Gbps to be comparable or better than this.

    For DS110DF111, I don't have any data beyond the data sheet specification for Jtol.

    Thanks,

    Drew