• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 163 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TIOL1123: Washable part?

Wouter Kragt
Intellectual 1830 points
Part Number: TIOL1123

Tool/software:

Hi Team,

I received the following questions from my customer.

Is the component TIOL1123DRCR is washable?

Can you please confirm this?

Thank you.

Kind regards,

Wouter Kragt

  • +1
    TI__Mastermind 33240 points

    Hi Wouter,

    I assume you mean as part of the flux residue removal and cleaning process after solder assembly. Here is a Processing and Handling application note for additional information. (Link)

    Yes this component should be washable with an appropriate drying cycle.  But this may depend on the specific process and chemicals used in the solder process so TI recommends you reach out to your flux vendor for recommended solvents and cleaning steps.

    Regards,

    Jonathan