DS90UB971-Q1: DS90UB971-Q1 DSi question

Lee Victor

Intellectual 305 points

Part Number: DS90UB971-Q1

Tool/software:

Hi Teams,

We need to use DS90UB971-Q1 on TAD4AL DSI , so is this possible?

Thank you so mcuh.

over 1 year ago

0 Darrah Merillat over 1 year ago

TI__Mastermind 27050 points

Hello,

Thank you for reaching out. Do you mean the TDA4AL processor? The TDA4 processor is often used with FPD-Link devices, but the DS90UB971-Q1 is a CSI interface serializer. The DS90UB971-Q1 is only able to receive CSI data streams.

0 Lee Victor over 1 year ago in reply to Darrah Merillat

Intellectual 305 points

Hi Dsrrdh Merillst Sir,

Thank you for your reply.

Under stand， DS90UB971-Q1 is for CSI TX receiver, My questions is that TAD4AL DSI1 port be able to support CSI TX transmission？

As we know TAD4AL only support one DSI port, it should be DSO0. But TAD4AL support two CSI TX port, it means CSI TX port reuse DSI 0 and DSI1?

If yes, could we reserve DSIO as a DP port, and use DSI1 as CSI TX by SW control?

Thank you so much.

0 Darrah Merillat over 1 year ago in reply to Lee Victor

TI__Mastermind 27050 points

Hello,

I've reassigned this thread to the TDA4 team. Someone from the team will respond to your question shortly.

0 Brijesh Jadav over 1 year ago in reply to Darrah Merillat

TI__Guru**** 479825 points

Hello Lee,

yes, DSI0 and DSI1 both can support CSITX output..

Regards,

Brijesh

Interface

Interface forum

DS90UB971-Q1: DS90UB971-Q1 DSi question