DS90UB953-Q1: Does TI have an upper computer tool for evaluating the signal quality between serializers and deserializers

Vayne Li

Part Number: DS90UB953-Q1

Tool/software:

Does TI have an upper computer tool for evaluating the signal quality between serializers and deserializers，such as MAXIM GMSL

We are using 953 and 954 to evaluate the signal quality transmitted between them in order to develop a sampling plan for the factory

10 months ago

0 Thomas Bejin 10 months ago

TI__Mastermind 24861 points

Hi Vayne,

Thanks for your question here. Have you taken a look at the margin analysis program in analog launchpad? This is a helpful tool to evaluate link margin at the FPD-Link receiver of the deserializer. This is discussed in the below application note, could you take a look and let me know if you have any questions here?

Margin Analysis Program (MAP) and strobe positions for DS90UB954-Q1 and DS90UB960-Q1.pdf

Best,

Thomas

0 Vayne Li 10 months ago in reply to Thomas Bejin

Intellectual 980 points

Hi Thomas,

Thanks for your reply, I will check it .

0 Thomas Bejin 10 months ago in reply to Vayne Li

TI__Mastermind 24861 points

Hi Vayne,

Please feel free to post any questions you may have here, we're happy to answer them.

Best,

Thomas

Interface

Interface forum

DS90UB953-Q1: Does TI have an upper computer tool for evaluating the signal quality between serializers and deserializers