• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 181 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMUXHS4412: TMUXHS4412

Balakrishnan kumar
Prodigy 50 points
Part Number: TMUXHS4412

Tool/software:

Dear Team,

Could you please provide a quick diagram showing the Mux connections?

For the Demux configuration, setting SEL to Low or High switches the common port between Port A and Port B. However, for Mux operation, I would like to know if it's possible to configure the Port A to common Port either Port B to Common port. What specific logic configuration should be applied to set the IC in Mux mode?

Please let me know your feedback. 

Regards,

Bala

  • +1
    TI__Mastermind 36690 points

    Hi Bala,

    The setting for what port D0/1/2/3 connects to is all controlled by the SEL pin. There are no specific settings based on mux and demux:

    The mux just carries the signal as it comes through D0/DA/DB and carries it through to the other side.

    Please let me know if you have any other questions.

    Thanks,

    Ryan