This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMUXHS4212: About RSVD1/2 pin connection

Part Number: TMUXHS4212

Tool/software:

I am facing the same issue as below.

Is it okay to connect RSVD1/2 to GND instead of VCC?

https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1327611/tmuxhs4212-about-rsvd1-2-pin-connection

  • Hi Masaru-san,

    These RSVD1/2 pins must be pulled up to VCC. Pulling down to GND will have the same effect as leaving it floating.

    Please let me know if you have any other questions.

    Thanks,

    Ryan