• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 184 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DP83867IR: Measures to improve registers to work with EtherCAT

Satoshi
Guru 19645 points
Part Number: DP83867IR


Tool/software:

Customer is trying to run EtherCAT on the DP83867IR, but can't communicate well.

Are there any problems with the attached register settings?

dp83867ir_register.xlsx

Would you please let me know if there are any points that should be careful about or adjustments that should make regarding the register settings?

Best regards,

Satoshi

  • 0
    TI__Mastermind 25955 points

    Hi Satoshi,

    Based on the register log, it seems like the PHY is linking up fine due to register 0x0001.

    If possible, may I ask for block diagram or schematic on how you run EtherCAT setup with DP83867IR.

    If my understanding is correct, Customer is running EtherCAT-G or EtherCAT in Gigabit with DP83867?

    --

    Regards,

    Hillman Lin