• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 34 subscribers
  • Views 270 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TRS3221E: PCNs required

Daryl Brozicevic
Prodigy 20 points

Part Number: TRS3221E

Tool/software:

Hello,

Can someone please send me all the PCN's related to the TRS3221EIPWR as we are finding some impedance difference in the charge pump circuits between old batches and new batches of the same part?

Thanks,

Daryl

  • 0
    Guru 320900 points

    That would be PCN# 20210720000.1. But it does not say anything about the impedance; the only changes were thermal parameters (see rev. B), and the guaranteed limits have not changed.

    You should use the recommended capacitor values, and keep all capacitor traces as short as possible. Do you have an actual problem? An RS-232 output is designed to drive no more than a single 5 kΩ receiver.

  • 0
    TI__Guru* 78531 points

    Hi Daryl,

    Attached is the PCN related to the die change for the device:

    PCN20210720000.1 TRS3221E.pdf

    We don't characterize the impedance values between pins for our devices. So we don't have that data available (the older die's characterization data is also not available).

    -Bobby