• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 33 subscribers
  • Views 55 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN65C1168: Power supply Vcc requiremnet

PYTsai
Genius 10465 points
Part Number: SN65C1168

Tool/software:

Hi 

How many watt is required for the power supply Vcc input to make sure the IC can work correctly ? 

in our application we are transmited 2Mbps over 100 meter cable. 

Thanks!

  • 0
    TI__Mastermind 33805 points

    Hi PYTsai,

    We are currently on holiday. 
    Please help give until next week for feedback, thanks. 

    Best Regards,

    Michael. 

  • 0
    Guru 283700 points

    The worst-case idle current is 9 mA for the driver and 9 mA for the receiver. The typical load current for 100 Ω termination is 2× 31 mA; the maximum is somewhat higher, but not specified. The additional supply current for switching at 2 Mbps it not specified, but you can assume something less than about 2× 20 mA. If you want the circuit to be able to handle a shorted outputs without the supply dropping out, then it must be able to handle more than 2× 150 mA.