DS90UB962-Q1: Could you help to address the ESD guide for TI962 with TI933?

wufeng jiang

Prodigy 30 points

Part Number: DS90UB962-Q1

Tool/software:

Hello TI expert,

We had refer "FPD ADAS ESD Optimizations 3Q24.pdf" to perform ESD test, but:

(1) FPD FC ECC is not support by ti933.

(2)reister 0x4A is not configure for FC ECC

Now we could only apply "0xB9=0x1F" to increases the number of errors, Could you help to address

the ESD guide for TI962 with TI933?

Thanks.

_______________

| |__________________ti933

| TI962 |__________________ti933

| |__________________ti933

|______________|

9 months ago

0 Zoe Bison 9 months ago

TI__Mastermind 23705 points

Hi Wufeng,

I recommend taking a look at the updated material regarding ESD optimizations that can be made for your system. An application note was published which documents this information in more detail. As mentioned FEC is not supported with UB933 however, all other optimizations discussed can be incorporated.

Please refer to the following thread which has more information on the App Note scope: [FAQ] DS90UB971-Q1: How can I optimize my FPD-Link camera design for system level ESD immunity?

Let me know if there are any additional guidance is needed here.

Best,

Zoe

Interface

Interface forum

DS90UB962-Q1: Could you help to address the ESD guide for TI962 with TI933?