• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 155 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TUSB216-Q1: TUSB216-Q1

Arabella Zhang
Intellectual 2990 points
Part Number: TUSB216-Q1

Tool/software:

Dears,

For the TUSB216-Q1 chip, what are the specifications of the resistor that pulls CDP_EN down? The customer needs to enable the CDP function.

Thanks,

Arabella

  • 0
    TI__Mastermind 38925 points

    Hi Arabella,

    There are no required resistor values for pulling down the CDP_ENZ pin. Either direct to ground can work, or something like a 10KOhm resistor is okay too.

    Please let me know if you have any other questions.

    Thanks,

    Ryan