TPD1E10B06: PESD5V0F1BRLD-Q replace

Albert Chuang1

Part Number: TPD1E10B06

Tool/software:

We want to use TPD1E10B06QDPYRQ1 to replace PESD5V0F1BRLD-Q, and my customer did TPD1E10B06QDPYRQ1 on board the ESD test, but failed. Could you please recommend a pin-to-pin replacement solution to alternate PESD5V0F1BRLD-Q ? Thanks.

over 1 year ago

0 Sebastian Muriel over 1 year ago

TI__Mastermind 21660 points

Hi Albert,

The TPD1E10B06 has higher IEC ESD ratings than the PESD5V0F1BRLD-Q and very similar clamping performance, it should not be getting damaged on any ESD testing that PESD5V0F1BRLD can pass.

When you say the ESD test failed, was only the IC downstream damaged? Or the ESD diode is damaged as well?

Also can you share details on the ESD test setup?

Regards,

Sebastian

0 Albert Chuang1 over 1 year ago in reply to Sebastian Muriel

Prodigy 40 points

Thanks! The application is a BMS, and the ESD issue ( phenomenon) is that the IC is in idle mode, sometimes restarting; it failed for the BMS customer, even though the IC is not damaged.

0 McKenzie Eaker over 1 year ago in reply to Albert Chuang1

TI__Genius 10520 points

Hi Albert,

What kV rating is causing the "phenomenon"? Also, can you share details on test setup?

Best,

McKenzie

Interface

Interface forum

TPD1E10B06: PESD5V0F1BRLD-Q replace