DP83867E: PCN Change. DP83867CS, DP83867IS, DP83867E Datasheet Rev. E

Hi Hiroaki, 

Here is the excel file with my comments

7217.QA_DP83867ーTI_20241213_1.xlsx

Best,

Vivaan

Vivaan-san

Thank you for your support and reply.

The change in the strap resistor constant in Table 7-5 is not valid for all lots of products shipped in the past.
The change was made in Revision A in February 2017, so does this apply to products from that point onwards?

Please respond to the five items that have yet to be answered as soon as you have confirmed them.

Best Regards,
Hiroaki Yuyama

Hi Hiroaki,

Through new learnings, we realized that there were better margins using the updated resistor values present in table 7-5. This change is reflected on all products irrespective of the manufacturing date. 

Best,

Vivaan

Vivaan-san,

Thank you for the information about the update to Table 7-5.
I will provide feedback to the customer.

Best Regards,
Hiroaki Yuyama

Hi Hiroaki,

Of course, I will update you after talking with my team about the datasheet revision mismatching. 

Best,

Vivaan

Vivaan-san,

Thank you for your tremendous support.

I have explained your advice to the customer.
I have some additional questions.

Please take the time to answer them.
The yellow text in the attached Excel file is the new question.

QA_DP83867ーTI_20241218.xlsx

Best Regards,
Hiroaki Yuyama

Hi Hiroaki, 

I have answered the questions in the file below. 

0361.QA_DP83867ーTI_20241218.xlsx

Best Regards,

Vivaan

Hi Vivaan-san,

Thank you for your quick response and answer.

I also have an additional question.
It's the text in yellow letters, No,10.
Could you also answer the additional question in No,1?

Our customer is currently conducting 10BASE-Te compliance testing for semiconductor manufacturing equipment.

QA_DP83867ーTI_20241219.xlsx

Best Regards,
Hiroaki Yuyama

Hi Hiroaki-san, 

Apologies for missing question no.1 in the last reply. I have answered both questions here.

3058.QA_DP83867ーTI_20241219.xlsx

Best,

Vivaan

Hi Vivaan-san,

Thank you so much for completing all of your replies so quickly.
The customer was in a hurry to test the prototype, so this was very helpful.

Best Regards,
Hiroaki Yuyama