DP83TC817S-Q1: Request IBIS model for the part DP83TC817SRHATQ1

Hi Andrea,

Please reach out to your field applications engineer, they will be able to provide the IBIS model.

Thanks,

David

Dear David, thank you very much for your response on regards.

But you mean to write in other forum to obtain the IBIS model?  In which do you suggest, I thought the appropriate was "Interface TI forum".

Thanks a lot,

Andrea

Hi Andrea,

The IBIS models for DP83TC817 can only be shared under NDA, and cannot be shared on the online forum. Please reach out to your field applications engineer directly, they will be able to share the IBIS files under NDA only.

Thanks,

David

Hi David,

thank you very much for the information. Ok no problem we understand. 

Could you only please provide us a mail address or a website link to contact somebody for achieving the NDA documentation to fill, then my company will provide the documentation.  In the TI website we didn't find the direct link, and any support contact for our request link is forward only to the forum.

Thanks,

Regards,

Andrea. 

Hi Andrea,

Are you in contact with a Field Application Engineer or Technical Sales Representative from Texas Instruments? They will be able to assist you with the NDA process. If not, you can use the Contact Us tool to find your representative. 

Thanks,

David

Hi David,

thank you very much for your help, we asked to the support center to the required NDA documentation.

Have a nice day.

Regards,

Andrea.  

Happy to help. I will close this thread now.

Thanks,

David