• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 273 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TUSB1310a TX_CLK connection

Donghoon Lee89423
Prodigy 10 points
Other Parts Discussed in Thread: TUSB1310A

Hi,

 

TUSB1310a has TX_CLK as input clock for TX_DATA.

But my link controller does not drive clock to PHY and PIPE3 specification also does not drive.

 

Is it mandatory to connect 250MHz clock to TX_CLK?

Can I connect PCLK to TX_CLK directly?

 

Thanks