TIOX1X2XEVM: Sample code for IO-link

Wouter Kragt

Intellectual 1830 points

Part Number: TIOX1X2XEVM
Other Parts Discussed in Thread: TIOL112, TIOL111

Tool/software:

Hi TI team,

My customer would like a sample code for TIOX1X2XEVM and cannot find something on our homepage and SDK.

Can you please share the sample code?

Thank you.

Kind regards,

Wouter Kragt

7 months ago

0 Jonathan Nerger 7 months ago

TI__Mastermind 33360 points

Hi Wouter,

The TIOL11xx and TIOS10xx devices do not have any registers that need to be configured and there is no sample code available. I'm assuming the customer is trying to obtain an IO-Link Device firmware stack, and TI does not have an IO-Link Device stack available to provide to customers. This would need to be obtained through a 3rd party such as TEConcept. I believe there are several TI Designs that have been created using the TEConcept stack that you might be able to reference.

Regards,

Jonathan

0 Wouter Kragt 7 months ago in reply to Jonathan Nerger

TI__Intellectual 1830 points

Hello Jonathan,

Can you please refer me to an exemplary reference design?

Thank you

Kind regards,

Wouter Kragt

+1 Jonathan Nerger 7 months ago in reply to Wouter Kragt

TI__Mastermind 33360 points

Hello Wouter,

Here is one example that is linked to the TIOL112 product folder on ti.com. https://www.ti.com/tool/TIDA-010263

Also, from a firmware perspective, the TIOL111 is functionally equivalent to the TIOL112 so any TI Designs with the TIOL111 could also be used as an example. You can find those by searching TI.com.

Regards,

Jonathan

Interface

Interface forum

TIOX1X2XEVM: Sample code for IO-link