DS90UB9702-Q1: Access to DS90UB97x-Q1 FPD-Link IV Power-Over-Coax Design Guidelines

Xavier Paños Font

Part Number: DS90UB9702-Q1

Tool/software:

Hello TI team,

I would need to access to the Application not of DS90UB97x-Q1 FPD-Link IV Power-Over-Coax Design Guidelines that is mentioned in the datasheet of DS90UB9702-Q1.

My company has NDA already signed with TI.

Could you give me access to this document through Secure Resources?

Thanks in advance for your support.

Best Regards!

6 months ago

0 Justin Phan 6 months ago

TI__Mastermind 28240 points

Hello Xavier,

Do you have a CDDS or MySecure account already setup with TI? NDA app notes are typically shared through these portals? If not, please reach out to your local FAE and request they set things up for you.

Best,

Justin Phan

0 Xavier Paños Font 6 months ago in reply to Justin Phan

Prodigy 20 points

Hello Justin,

Yes I have Mysecure account already created. In fact I have already obtained confidential datasheet in this way.

See this screenshot as evidence.

Could you upload the application note here?

Thank you in advance for your support.

0 Justin Phan 6 months ago in reply to Xavier Paños Font

TI__Mastermind 28240 points

Hello Xavier,

Right now, we are in the middle of migrating documents from CDDS to MySecure. Could you reach out to your local TI FAE and have them support you in granting you access to the App Note in CDDS?

If the TI FAE has any questions, please direct them to me.

Best,

Justin Phan

0 Xavier Paños Font 6 months ago in reply to Justin Phan

Prodigy 20 points

Hello Justin,

Thanks for your prompt reply.

As far as I know we do not have any assigned FAE.

My people in contact in TI and the ones that managed the NDA are:

Anatya Vallabh (Account Manager): anatyavallabh@ti.com
Mohit Agarwal (Regional Sales Manager): mohitagarwal@ti.com

Please, could you contact directly to them and try to help us?

I think it will be faster, we are in the middle of the design and we need to check out this concrete app note.

Thanks in advance for your support.

I really appreciate it.

0 Justin Phan 6 months ago in reply to Xavier Paños Font

TI__Mastermind 28240 points

Hello Xavier,

Does your company have a CDDS account setup with TI? If not, then you would need to contact your local sales representative to help set that up. If you like, you can look me in on the email.

j-phan1@ti.com

Best,

Justin Phan

Interface

Interface forum

DS90UB9702-Q1: Access to DS90UB97x-Q1 FPD-Link IV Power-Over-Coax Design Guidelines