DS30EA101: DS30EA101SQX/NOPB

user3488518

Part Number: DS30EA101

Tool/software:

Hello, I have a question, coud you help me? Please see the picture below, Tested by X-ray, there are differences in the phenomena shown. Is it possible that it's due to different places of origin?
Test sample date code: 2429 COO malaysia
Golden sample: not sure, was received in year of 2017 I would appreciate it if you could help me with this puzzle asap
.

11 months ago

0 David Waier 11 months ago

TI__Mastermind 20701 points

Hi,

Could you help to verify which sample shown in newer? Do you have more specific dates for the units?

Based on feedback from our product engineering team, the cross-wires are not ideal.

Best,
David

0 user3488518 11 months ago in reply to David Waier

Prodigy 50 points

Hello David,thank you for your help. Please see below label picture : DC is 2429+ , ACO (Assembly Country Origin) IS MYS. Please confirm the newer is right. Thankyou again.

0 David Waier 11 months ago in reply to user3488518

TI__Mastermind 20701 points

Hello,

Thank you for providing these additional details. Please allow me to review them and get back to you tomorrow.

Best,
David

0 David Waier 11 months ago in reply to David Waier

TI__Mastermind 20701 points

Hello,

The cross wire bonding profile is preferred for these units. Its unclear when the "golden" sample pictured was obtained, though this should not show any issues.

Best,
David

0 user3488518 11 months ago in reply to David Waier

Prodigy 50 points

the "golden" sample pictured was obtained in 2017/1/18。Whether if both lead frame styles are valid？

0 David Waier 11 months ago in reply to user3488518

TI__Mastermind 20701 points

Hello,

Both styles are valid.

Best,
David

Interface

Interface forum

DS30EA101: DS30EA101SQX/NOPB