• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 71 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TUSB1002A: EQ and CFG selection

Naizeng Wang
Expert 5380 points
Part Number: TUSB1002A

Tool/software:

Hi team. 

I think customer can choose EQ8 for CH1 and EQ4 for CH2, correct? 

Which CFG should they select? I don't konw how to select it. 

  • 0
    TI__Mastermind 36450 points

    Hello,

    Naizeng Wang said:
    I think customer can choose EQ8 for CH1 and EQ4 for CH2, correct? 

    These settings seem fine to me, I have no issue with them.

    Naizeng Wang said:
    Which CFG should they select? I don't konw how to select it. 

    Typically, you can leave these settings at a DC gain of 0 and a mVpp of 1200mV, so F/F. There are a few example cases where DC gain can be changed:

    Please let me know if you have any other questions.

    Thanks,

    Ryan