Tool/software:
Hello Team,
I am using DP83869HM PHY IC in one of my Project.
I need IEEE 802.3 (2018) Compliance test report of DP83869HM for below Sections,
Transmitter Electrical Specification:
1) 40.6.1.2.1 Peak differential output voltage and level accuracy.
2) 40.6.1.2.2 Maximum output droop
3) 40.6.1.2.3 Differential output templates
4) 40.6.1.2.4 Transmitter distortion
5) 40.6.1.2.5 Transmitter timing jitter
6) 40.6.1.2.6 Transmit clock frequency
7) 40.6.1.2.7 Transmitter operation following a transition from the QUIET to the WAKE state
Receiver Electrical Specification:
1) 40.6.1.3.1 Receiver differential input signals
2) 40.6.1.3.2 Receiver frequency tolerance
3) 40.6.1.3.3 Common-mode noise rejection
4) 40.6.1.3.4 Alien Crosstalk noise rejection
5) 40.6.1.3.5 Signal_detect
The above said test result/report required to verify the compliance.
Note: I have found few test reports in Texas Instruments web page. But those are insufficient to address my requirements.
This is an urgent requirement and Please consider this on high priority.
Regards,
Prabakaran P
