Tool/software:
Hi team,
My customer Valeo asked if we have serdes meet the requirement below:
1. mini Frake interface with coaxial cable
2. LVDS signal input, LVSD signal output.
3. Resolution 1500 * 290
Best Regards,
Xiaowei Zhang
Hello Xiaowei,
This sounds like a use case that can use our DS90UB933-Q1 and DS90UB934-Q1 chipset. Valeo would just need to check if the PCLK inputted to the 933 is within the allowable range supported by the serializer.
And any of our SER/DES chipset can use a mini-Fakra (HFM) interface to COAX cable. The only thing they must meet is the IL/RL limits defined in the FPD3 Channel Specifications.
Best,
Justin Phan
