DS90UB941AS-Q1: Can we support single link with DOUT1?

Marsh Cai

Part Number: DS90UB941AS-Q1
Other Parts Discussed in Thread: DS90UB981-Q1

Tool/software:

Hi Teams,

Can we support single link with DOUT1? My customer is trying to use single FPD-LINK port and want to use the DOUT1, is this doable? how to configure?

BRs,

Marsh

over 1 year ago

0 Ikram Haque over 1 year ago

TI__Mastermind 32150 points

Hi Marsh,

on the 941AS the single link mode is only supported for Port 0. Also mentioned in this E2E: https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1439445/ds90ub941as-q1-forced-single-fpd-link-iii-transmitter-mode-for-port-1/

Best regards,
Ikram

+1 Ikram Haque over 1 year ago in reply to Ikram Haque

TI__Mastermind 32150 points

However, the DS90UB981-Q1 can be used here instead since it supports MIPI DSI, and can support FPD3 mode, Single-link on Port1.

The UB981 and 941AS have a common landing pattern, and on the FPD link marketing page you can find the comparison of pin-out and external component differences.

Best regards,
Ikram

Interface

Interface forum

DS90UB941AS-Q1: Can we support single link with DOUT1?