• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 33 subscribers
  • Views 87 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

SN65HVD230: SN65HVD230 Decap value

Parvin Sherakar
Prodigy 40 points
Part Number: SN65HVD230

Tool/software:

Hi,

We are using SN65HVD230D in our design. During production, 10nF capacitor is populated instead of 100nF. almost 3000 PCBs are soldered.

Could you please confirm if it is ok to use 10nF? how critical is 100nF value is?

Regards

PArvin 

  • +1
    TI__Guru 50676 points

    Hi Parvin,

    It is dependent on the stability of their power supply and how harsh the system environment is in terms of noise and would recommend they verify if acceptable for their specific environment, thanks. 

    Best Regards,

    Michael.