DS90UB913A-Q1: Pair with 954 EVM

Katie Lee1

Part Number: DS90UB913A-Q1

Tool/software:

Hi,

My customer is trying to pair their 913 camera with a 954 EVM. Besides following the instructions in the 954 EVM User guide to change to RAW10 and adjusting the PoC network, what other changes (SW or HW) do we need to do in order to put the 954 in backwards compatibility mode and get lock?

Thanks,

Katie

6 months ago

0 Zoe Bison 6 months ago

TI__Mastermind 24095 points

Hi Katie,

The UB954 and UB913 should be able to lock assumming the straps agree. The limitation on the EVM here is for the PoC voltage to be reworked. See below picture on the PoC voltage rework:

Best,

Zoe

0 Katie Lee1 6 months ago in reply to Zoe Bison

TI__Expert 5385 points

Hi Zoe,

We don't have to do anything else with setting the backchannel speed or adjusting Frame Valid and Line Valid setup times?

Thanks,

Katie

0 Zoe Bison 6 months ago in reply to Katie Lee1

TI__Mastermind 24095 points

Hi Katie,

BC speedwill default to 2.5Mbps with the strap set to RAW10. Additional configurations can be made depending on system context but, this is all that is required for LOCK.

Best,

Zoe

Interface

Interface forum

DS90UB913A-Q1: Pair with 954 EVM